Search results: “ardex” (17)

View as
  • ARDEX OVP Overhead Vertical Patch Gray 20#

    $38.85
    ARDEX OVP™ is a trowelable Portland cement-based finishing compound used to fill and smooth interior and exterior vertical concrete surfaces such as tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces prior to sealing or painting.
  • ARDEX V1200 Self-Leveling Underlayment 50#

    $33.13
    ARDEX V 1200™ is a blend of Portland cements, other hydraulic cements and polymers that is used to level and smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete prior to the installation of finished flooring – on, above or below grade.
  • ARDEX Concrete Guard GREY GL

    $65.10
    ARDEX CG Concrete Guard™, applied at a minimum of two coats, is designed to protect all interior and exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces.
  • ARDEX Feather Finish

    $19.87$30.55

    Self-Drying Cement-Based Finish Underlayment

    • Provides a smooth surface prior to the installation of floor covering over a variety of substrates
    • Exceptional bond strength
    • Install floor coverings in as little as 15 minutes
  • ARDEX P-51 Primer GL

    $53.24

    Primer

    • For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
    • Seals the substrate
    • For bonding ARDEX underlayments and toppings to appropriate substrates
  • ARDEX 8+9 Kit Gray

    $77.93

    Rapid Waterproofing and Crack Isolation Compound

    • Install tile in just 90 minutes and flood test in 4 hours
    • Crack isolation up to 1/8" (3 mm)
    • Zero water penetration via wind-driven rain
  • ARDEX Tilt Wall Patch 10#

    $24.28

    Tilt Wall Patch and Finishing Compound for Vertical Concrete Walls​​​

    • Use for filling and smoothing interior and exterior vertical concrete or masonry surfaces
    • Easy to mix and apply
    • Hardens quickly without shrinking
  • ARD PC-10 LITHIUM HARDENER DENSIFIER 5GAL

    $178.61
    DESCRIPTION:
    • 5 Gallons
    • For use in the grinding and polishing of ARDEX Polished Concrete Systems
    • Creates an extremely dense, durable hard surface that resists dusting and wear
    • Increases reflectivity and lowers maintenance costs
    • Interior use only
  • ARD P-82 PRIMER GL

    $71.67
    DESCRIPTION:
    • For the installation of ARDEX underlayments over non-porous, wood and metal substrates and adhesive residue on concrete
    • Waterborne, two-component primer
    • Use for interior applications only
  • ARD P-51 PRIMER 4GAL

    $219.45
    DESCRIPTION:
    • For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
    • Seals the substrate
    • For bonding ARDEX underlayments and toppings to appropriate substrates
  • ARD P4 PRIMER GAL.

    $38.43
    DESCRIPTION:
    • Pre-Mixed, Rapid-Drying, Multipurpose Primer
    • ARDEX P 4 is specifically formulated for use prior to the installation of ARDEX Tile & Stone mortars and most ARDEX self-leveling underlayment
    • It offers a textured surface for the optimal bond over most common substrates
    • The unique consistency of ARDEX P 4 virtually eliminates drips and splatters and dries in as little as 30 minutes
    • For use over a wide variety of substrates, ARDEX P 4 provides outstanding coverage at 300 sq. ft. (27.8 sq. m) per gallon
  • ARD MRF 10LB

    $19.70
    DESCRIPTION:
    • Moisture Resistant, Rapid-Drying, Skim coat Patching Underlayment
    • Engineered to withstand 100% RH; unlimited moisture and water
    • ARDEX Weatherproof Technology
    • Rapid-drying - install floor coverings in as little as 30 minutes
  • ARD EP2000 SUBSTRATE PREP EPOXY #10

    $153.52
    DESCRIPTION:
    • Two-component epoxy preparation material for the installation of ARDEX underlayments and toppings
    • Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
    • Required primer for decorative applications of ARDEX self-leveling toppings
    • Helps to minimize cracking in underlayment and toppings
    • Can be used as crack filling material
    • Can be used to provide secondary top-down waterproofing
    • Solvent-free, low viscosity, 100% solids epoxy resin
    • Use for interior and exterior substrates
  • ARD SDM WHITE #10 BAG

    $31.62
    DESCRIPTION:
    • Use over concrete, terrazzo and ceramic, quarry and porcelain tile
    • Can be used to create a burnish-polished surface on indoor concrete
    • Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
    • Mold and mildew resistant Portland cement-based Use for interior floors only
  • ARD SDM GRIS #10 BAG

    $29.68
    DESCRIPTION:
    • Use over concrete, terrazzo and ceramic, quarry and porcelain tile
    • Can be used to create a burnish-polished surface on indoor concrete
    • Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
    • Mold and mildew resistant Portland cement-based Use for interior floors only
  • ARD #SK-25 Mesh Roll 12mmx25mtr

    $25.95
    Premium, non-woven, polyester mesh reinforcement fabric is used for reinforcement of ARDEX 8+9™ Rapid Waterproofing and Crack Isolation Compound in changes of plane, changes of material, corners and crack isolation