Search results: “mapei” (98)

View as
  • MAPEI #2435508 PLANISEAL VS PT “A” 2.2GL

    $261.13
    DESCRIPTION:
    • Part A
    • Alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings
    • Expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations
  • MAPEI #2758423 PLANITOP 18 TG 50LB

    $25.59
    DESCRIPTION:
    • One-component, shrinkage-compensated, very rapid-hardening,
    • trowel-grade, cementitious repair mortar with a corrosion inhibitor
    • Planitop 18 TG gains strength rapidly and is particularly suited for all horizontal concrete repairs from 1/2" to 2" (12 mm to 5 cm) thickness when applied neat and up to 8" (20 cm) when extended with aggregate
  • MAPEI #276645 MAPEFER 1K

    $21.65
    DESCRIPTION:
    • One-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors
    • Specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation
  • MAPEI #31668000 MAPEFINISH WET LOOK 5GL

    $138.99
    DESCRIPTION:
    • One-part, water-based, transparent, glossy sealer designed for protecting concrete surfaces – from highly textured stamped concrete to smooth self-leveling toppings
  • MAPEI #36053000 PRIMER L GAL

    $18.04
    DESCRIPTION:
    • Concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification
    • Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment
    • Can be used as a primer for gypsum-based underlayment and patches
  • MAPEI #36068000 PRIMER L 5GAL

    $82.27
    DESCRIPTION:
    • Concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification
    • Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment
    • Can be used as a primer for gypsum-based underlayment and patches
  • MAPEI #36163000 ECO PRIM GRIP 3.5 PAILA

    $115.95
    DESCRIPTION:
    • ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion
    • It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond-to substrates
    • It improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates
    • Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application
  • MAPEI #36553 PRIMER E PART B 0.94GAL

    $57.24
    DESCRIPTION:
    • Part B
    • High-Performance
    • A two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments using MAPEI’s sand broadcast method
    • The most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments subject to high stress
    • Low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore a tenacious bond
  • MAPEI #36564 PRIMER E PART A 2.06GAL

    $119.22
    DESCRIPTION:
    • Part A
    • High-Performance
    • A two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments using MAPEI’s sand broadcast method
    • The most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments subject to high stress
    • Low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore a tenacious bond
  • MAPEI #37411 PLANIPREP SC 10LB

    $14.34
    DESCRIPTION:
    • High-performance, polymer-modified, fiber-reinforcedcement-based skimcoating and patching compound
    • Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates
    • Creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound
    • Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application,depending on thickness and environmental conditions
  • MAPEI #40158000 EBA 2GAL

    $146.35
    DESCRIPTION:
    • Part A + B in 2gal
    • Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent
    • Planibond EBA is non shrink, 100%-solids and moisture-tolerant
    • Is used primarily as a bonding agent for screeds and repair mortars
  • MAPEI #40169000 PLANIBOND EBA PART A 5G

    $285.75
    DESCRIPTION:
    • Part A
    • Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent
    • Planibond EBA is non shrink, 100%-solids and moisture-tolerant
  • MAPEI #40269000 PLANIBOND EBA PART B 5GAL

    $288.13
    DESCRIPTION:
    • Part B
    • Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent
    • Planibond EBA is non shrink, 100%-solids and moisture-tolerant
    • Is used primarily as a bonding agent for screeds and repair mortars
  • MAPEI #46074 PLANIBOND JF CASE 2OZ

    $37.99
    DESCRIPTION:
    • Planibond JF is a two-part, 100%-solids, moisture-tolerant, semi-rigid, epoxy joint filler
  • MAPEI #46353 PLANISEAL VS PT “B” .8GL

    $103.17
    DESCRIPTION:
    • Part B
    • Alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings
    • Expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations
  • MAPEI #48668 MAPACRETE HARD LI 5GAL

    $119.95
    DESCRIPTION:
    • Water-based, VOC-free, lithium silicate solution used to densify, seal and dustproof horizontal, hard-troweled concrete surfaces
    • It penetrates the concrete surface, chemically reacts with the free lime and produces a dense, hard matrix within the concrete and a more durable surface on top
  • MAPEI #49068 MAPECURE CS 5GAL

    $133.59
    DESCRIPTION:
    • 100%-pure acrylic polymer concrete sealer designed to protect and enhance cured concrete
    • Produces a non-yellowing, satin finish film that highlights the appearance of decorative concrete, including stamped concrete, colored concrete pavers and acid-stained concrete
  • MAPEI #6BU000205 ULTRACOLOR PLUS FA PEWTER #02

    $19.95
    DESCRIPTION:
    • Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
    • DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
    • Ultracolor Plus FA is specially formulated with MAPEI’s
    • High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
  • MAPEI #6BU001905 ULTRACOLOR PLUS FA PEARL GRAY #19

    $19.95
    DESCRIPTION:
    • Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
    • DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
    • Ultracolor Plus FA is specially formulated with MAPEI’s
    • High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
  • MAPEI #6BU003805 ULTRACOLOR PLUS FA PEARL AVALANCHE #38

    $19.95
    DESCRIPTION:
    • Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
    • DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
    • Ultracolor Plus FA is specially formulated with MAPEI’s
    • High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
  • MAPEI #6BU004705 ULTRACOLOR PLUS FA PEARL CHARCOAL #47

    $14.99
    DESCRIPTION:
    • Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
    • DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
    • Ultracolor Plus FA is specially formulated with MAPEI’s
    • High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
  • MAPEI #7013004 PLANICRETE AC 3.75L

    $15.59
    DESCRIPTION:
    • Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces
  • MAPEI #7013020 PLANICRETE AC 20L

    $63.49
    DESCRIPTION:
    • Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces
  • MAPEI #7492823 ULTRAPLAN LSC 50lb

    $36.65
    DESCRIPTION:
    • Ultraplan LSC is a super fluid, high-flow, calcium-aluminate-cement-based underlayment designed for thin-coat applications over large surfaces
    • Unique flow properties allow Ultraplan LSC to spread easily and quickly, potentially eliminating the need for hand-applied skimcoats
    • This product cures to a hard and flat surface that typically requires no further touchup or repair, accelerating floor-covering installation and reducing the need for additional patching or skimcoating materials
  • MAPEI #8088125 PLANISEAL 88 WHITE 55LB

    $33.35
    DESCRIPTION:
    • Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing, including masonry surfaces, at a maximum depth of 10 feet (3,05 m)
    • Planiseal 88 is also used as an accessory product for MAPEI waterproofing products