Cart (0)
Close
-
ARD FEATHER FINISH WHITE 10#
$46.50Self-Drying Cement-Based Finish Underlayment
- Provides a smooth surface prior to the installation of floor covering over a variety of substrates
- Exceptional bond strength
- Install floor coverings in as little as 15 minutes
-
ARD ARDIFIX 21.02oz
$50.29- Two-part polyurethane
- Extremely low viscosity allows for deep penetration
- Repairs very fine cracks
- Use interior or exterior
- Put into service in 10 to 15 minutes
-
ARD V1000 SELF-LEVELING UNDERLAYMENT #50
$31.50DESCRIPTION:- Use to level and smooth interior concrete and cementitious terrazzo
- Can be tapered to meet existing elevations
- Install most floor covering after 24 hours
-
ARD TRM TRANSPORTATION REPAIR MORTAR #50
$45.59DESCRIPTION:- Fast setting structural repair mortar for overlays and full depth interior and exterior repairs
- Installs from 1/2” to 4” neat, and up to 8” with aggregate
- Accepts foot traffic in 2 hours, vehicular traffic in 6 hours
-
ARD SDT SELF-LEVELING TOPPING WHITE #50
$80.44DESCRIPTION:- Color: White
- Self-Drying, Self-Leveling Concrete Topping
- Walk on and seal in as little as 2 hours
- For commercial, light industrial and residential applications
-
ARD SDT SELF-LEVELING TOPPING GREY #50
$70.81DESCRIPTION:- Color: Grey
- Self-Drying, Self-Leveling Concrete Topping
- Walk on and seal in as little as 2 hours
- For commercial, light industrial and residential applications
-
ARD SDP RAPID CONCRETE UNDERLAYMENT #40
$43.20DESCRIPTION:- Self-Drying, Trowelable Concrete Underlayment
- Ideal for ramping, patching large areas and screeding
- Ready for floor covering in as little as 60 minutes
- No primer required over concrete
-
ARD PC FINISH HIGH GLOSS 5G
$792.88DESCRIPTION:- Stain & Wear Protection - High and Low Gloss
- Increases abrasion and stain resistance
- Interior use only
-
ARD PC-10 LITHIUM HARDENER DENSIFIER 5GAL
$178.61DESCRIPTION:- 5 Gallons
- For use in the grinding and polishing of ARDEX Polished Concrete Systems
- Creates an extremely dense, durable hard surface that resists dusting and wear
- Increases reflectivity and lowers maintenance costs
- Interior use only
-
ARD P-82 PRIMER GL
$71.67DESCRIPTION:- For the installation of ARDEX underlayments over non-porous, wood and metal substrates and adhesive residue on concrete
- Waterborne, two-component primer
- Use for interior applications only
-
ARD P-71 PRIMER GL
$49.69DESCRIPTION:- For standard absorbent concrete
- Ready to use
- Minimizes the formation of pinholes
-
ARD P-51 PRIMER 4GAL
$219.45DESCRIPTION:- For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
- Seals the substrate
- For bonding ARDEX underlayments and toppings to appropriate substrates
-
ARD P4 PRIMER GAL.
$48.25DESCRIPTION:- Pre-Mixed, Rapid-Drying, Multipurpose Primer
- ARDEX P 4 is specifically formulated for use prior to the installation of ARDEX Tile & Stone mortars and most ARDEX self-leveling underlayment
- It offers a textured surface for the optimal bond over most common substrates
- The unique consistency of ARDEX P 4 virtually eliminates drips and splatters and dries in as little as 30 minutes
- For use over a wide variety of substrates, ARDEX P 4 provides outstanding coverage at 300 sq. ft. (27.8 sq. m) per gallon
-
ARD 8+9 KIT WHITE
$102.79DESCRIPTION:- Install tile in just 90 minutes and flood test in 4 hours
- Crack isolation up to 1/8" (3 mm)
- Zero water penetration via wind-driven rain
- Ideal for applications in commercial and residential bathrooms, showers and kitchens prior to the installation of tile and stone
- For use in swimming pools*
- Use for interior or exterior floors and walls
-
ARD MRF 10LB
$18.69DESCRIPTION:- Moisture Resistant, Rapid-Drying, Skim coat Patching Underlayment
- Engineered to withstand 100% RH; unlimited moisture and water
- ARDEX Weatherproof Technology
- Rapid-drying - install floor coverings in as little as 30 minutes
-
ARD MC RAPID MOISTURE CONTROL SYSTEM #22
$382.75DESCRIPTION:- One-coat epoxy resin system
- Ready to prime in just 4 hours
- For RH readings up to 100%
-
ARD K520 SELF LEVELING CONCRETE TOPPING #50
$49.75DESCRIPTION:- Resurface indoor concrete and certain non-porous surfaces
- Walk on in 2 - 3 hours, seal in as little as 24 hours
- Polish in as little as 24 hours
-
ARD K301 EXTERIOR SELF-LEVELING TOPPING #50
$70.35DESCRIPTION:- Smooth new or existing concrete and approved non-porous surfaces
- Suitable for use in wet areas
- Use for exterior and interior applications
-
ARD K15 SELF-LEVELING UNDERLAYMENT #55
$60.25DESCRIPTION:- Use over interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete
- Can be tapered to meet existing elevations
- Rapid setting
-
ARD GPS #25
$26.35DESCRIPTION:- Use to patch and skim coat concrete, wood, adhesive residues on concrete and more
- Install floor covering in 1 to 2 hours
- Suitable for residential and most commercial floor coverings
-
ARD FORTI FINISH #10
$30.14DESCRIPTION:- High compressive strength – over 7800 psi
- Smooth existing concrete prior to installing vinyl and other floor coverings in critical areas
- Install from a true featheredge to any depth
-
ARD ERM EXTERIOR RAMP MORTAR #55
$44.39DESCRIPTION:- Polymer modified structural repair mortar with integral corrosion inhibitor
- Installs up to 8”
- For exterior and interior concrete repair, maintains shape for ramping and balconies
-
ARD EP2000 SUBSTRATE PREP EPOXY #10
$153.52DESCRIPTION:- Two-component epoxy preparation material for the installation of ARDEX underlayments and toppings
- Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
- Required primer for decorative applications of ARDEX self-leveling toppings
- Helps to minimize cracking in underlayment and toppings
- Can be used as crack filling material
- Can be used to provide secondary top-down waterproofing
- Solvent-free, low viscosity, 100% solids epoxy resin
- Use for interior and exterior substrates
-
ARD EB-2 FAST SETTING SCREED CONCRETE #50
$58.36DESCRIPTION:- Use for interior and exterior bonded, un-bonded and floating screed beds
- Ideal as a screed bed for tile and stone installations
- Walk on and install tile in as little as 3 hours
