Cart (0)
Close
-
MAPEI PLANITOP 15
$35.35- Planitop 15 is a one-component, shrinkage-compensated, cementitious, fiber reinforced, fluid mortar
- Contains a corrosion inhibitor and silica fume, and is well-suited for form-and-pour and form-and-pump applications where high early strength and flowability are required
-
MAPEI PLANILEVEL 500 50lbs.
$48.99DESCRIPTION:- Quick-Setting, High-Compressive-Strength Underlayment and Topping
- PlaniLevel 500 is a calcium-aluminate-based, quick-setting, self-drying, self-leveling material. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to the wheel tracking and indentations experienced in softer underlayment
-
MAPEI #2435508 PLANISEAL VS PT “A” 2.2GL
$313.50DESCRIPTION:- Part A
- Alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings
- Expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations
-
MAPEI #2758423 PLANITOP 18 TG 50LB
$29.25DESCRIPTION:- One-component, shrinkage-compensated, very rapid-hardening,
- trowel-grade, cementitious repair mortar with a corrosion inhibitor
- Planitop 18 TG gains strength rapidly and is particularly suited for all horizontal concrete repairs from 1/2" to 2" (12 mm to 5 cm) thickness when applied neat and up to 8" (20 cm) when extended with aggregate
-
MAPEI #276645 MAPEFER 1K
$24.75DESCRIPTION:- One-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors
- Specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation
-
MAPEI #31668000 MAPEFINISH WET LOOK 5GL
$163.69DESCRIPTION:- One-part, water-based, transparent, glossy sealer designed for protecting concrete surfaces – from highly textured stamped concrete to smooth self-leveling toppings
-
MAPEI #36053000 PRIMER L GAL
$21.15DESCRIPTION:- Concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification
- Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment
- Can be used as a primer for gypsum-based underlayment and patches
-
MAPEI #36068000 PRIMER L 5GAL
$94.25DESCRIPTION:- Concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification
- Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment
- Can be used as a primer for gypsum-based underlayment and patches
-
MAPEI #36163000 ECO PRIM GRIP 3.5 PAILA
$163.00DESCRIPTION:- ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion
- It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond-to substrates
- It improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates
- Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application
-
MAPEI #36553 PRIMER E PART B 0.94GAL
$67.79DESCRIPTION:- Part B
- High-Performance
- A two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments using MAPEI’s sand broadcast method
- The most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments subject to high stress
- Low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore a tenacious bond
-
MAPEI #36564 PRIMER E PART A 2.06GAL
$143.25DESCRIPTION:- Part A
- High-Performance
- A two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments using MAPEI’s sand broadcast method
- The most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments subject to high stress
- Low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore a tenacious bond
-
MAPEI #37411 PLANIPREP SC 10LB
$16.50DESCRIPTION:- High-performance, polymer-modified, fiber-reinforcedcement-based skimcoating and patching compound
- Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates
- Creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound
- Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application,depending on thickness and environmental conditions
-
MAPEI #40158000 EBA 2GAL
$153.54DESCRIPTION:- Part A + B in 2gal
- Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent
- Planibond EBA is non shrink, 100%-solids and moisture-tolerant
- Is used primarily as a bonding agent for screeds and repair mortars
-
MAPEI #40169000 PLANIBOND EBA PART A 5G
$306.07DESCRIPTION:- Part A
- Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent
- Planibond EBA is non shrink, 100%-solids and moisture-tolerant
-
MAPEI #40269000 PLANIBOND EBA PART B 5GAL
$288.13DESCRIPTION:- Part B
- Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent
- Planibond EBA is non shrink, 100%-solids and moisture-tolerant
- Is used primarily as a bonding agent for screeds and repair mortars
-
MAPEI #46074 PLANIBOND JF CASE 2OZ
$37.99DESCRIPTION:- Planibond JF is a two-part, 100%-solids, moisture-tolerant, semi-rigid, epoxy joint filler
-
MAPEI #46353 PLANISEAL VS PT “B” .8GL
$123.99DESCRIPTION:- Part B
- Alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings
- Expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations
-
MAPEI #48668 MAPACRETE HARD LI 5GAL
$180.39DESCRIPTION:- Water-based, VOC-free, lithium silicate solution used to densify, seal and dustproof horizontal, hard-troweled concrete surfaces
- It penetrates the concrete surface, chemically reacts with the free lime and produces a dense, hard matrix within the concrete and a more durable surface on top
-
MAPEI #49068 MAPECURE CS 5GAL
$133.59DESCRIPTION:- 100%-pure acrylic polymer concrete sealer designed to protect and enhance cured concrete
- Produces a non-yellowing, satin finish film that highlights the appearance of decorative concrete, including stamped concrete, colored concrete pavers and acid-stained concrete
-
MAPEI #6BU000205 ULTRACOLOR PLUS FA PEWTER #02
$25.99DESCRIPTION:- Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
- DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
- Ultracolor Plus FA is specially formulated with MAPEI’s
- High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
-
MAPEI #6BU001905 ULTRACOLOR PLUS FA PEARL GRAY #19
$25.99DESCRIPTION:- Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
- DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
- Ultracolor Plus FA is specially formulated with MAPEI’s
- High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
-
MAPEI #6BU003805 ULTRACOLOR PLUS FA PEARL AVALANCHE #38
$25.99DESCRIPTION:- Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
- DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
- Ultracolor Plus FA is specially formulated with MAPEI’s
- High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
-
MAPEI #6BU004705 ULTRACOLOR PLUS FA PEARL CHARCOAL #47
$25.99DESCRIPTION:- Ultracolor Plus FA with DropEffect™ technology is an ultra-premium, fineaggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm)
- DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints
- Ultracolor Plus FA is specially formulated with MAPEI’s
- High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence
-
MAPEI #7013004 PLANICRETE AC 3.75L
$15.59DESCRIPTION:- Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces
