Cart (0)
Close
-
ARD FORTI FINISH #10
$30.14DESCRIPTION:- High compressive strength – over 7800 psi
- Smooth existing concrete prior to installing vinyl and other floor coverings in critical areas
- Install from a true featheredge to any depth
-
ARD ERM EXTERIOR RAMP MORTAR #55
$44.39DESCRIPTION:- Polymer modified structural repair mortar with integral corrosion inhibitor
- Installs up to 8”
- For exterior and interior concrete repair, maintains shape for ramping and balconies
-
ARD EP2000 SUBSTRATE PREP EPOXY #10
$153.52DESCRIPTION:- Two-component epoxy preparation material for the installation of ARDEX underlayments and toppings
- Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings
- Required primer for decorative applications of ARDEX self-leveling toppings
- Helps to minimize cracking in underlayment and toppings
- Can be used as crack filling material
- Can be used to provide secondary top-down waterproofing
- Solvent-free, low viscosity, 100% solids epoxy resin
- Use for interior and exterior substrates
-
ARD EB-2 FAST SETTING SCREED CONCRETE #50
$58.36DESCRIPTION:- Use for interior and exterior bonded, un-bonded and floating screed beds
- Ideal as a screed bed for tile and stone installations
- Walk on and install tile in as little as 3 hours
-
ARD CP CONCRETE PATCH #40
$54.59DESCRIPTION:- Repair, re-slope and re-form all concrete surfaces
- Easy to apply and hardens quickly
- Use for interior and exterior floors and walls
- Suitable for foot and rubber tire traffic
-
ARD CD MID GRAY #40
$77.99DESCRIPTION:- Resurface worn and spalled concrete to provide a “new concrete” finish
- Suitable for foot and rubber tire traffic on commercial and residential applications
- Use for interior and exterior floors and walls
-
ARD CD FINE WHITE #20
$45.50DESCRIPTION:- Resurface worn and spalled concrete to provide a “new concrete” finish
- Suitable for foot and rubber tire traffic on commercial and residential applications
- Use for interior and exterior floors and walls
-
ARD CD FINE GRAY #20
$48.75DESCRIPTION:- Resurface worn and spalled concrete to provide a “new concrete” finish
- Suitable for foot and rubber tire traffic on commercial and residential applications
- Use for interior and exterior floors and walls
-
ARD BONDING & ANTI CORROSION AGENT (UNIT) #36.5
$185.19DESCRIPTION:- Exceptional bond strength for concrete repairs
- Protects reinforcing steel against rust and corrosion
- Long open time
- Clean up with water only
-
ARD SDM WHITE #10 BAG
$31.62DESCRIPTION:- Use over concrete, terrazzo and ceramic, quarry and porcelain tile
- Can be used to create a burnish-polished surface on indoor concrete
- Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
- Mold and mildew resistant Portland cement-based Use for interior floors only
-
ARD SDM GRIS #10 BAG
$36.79DESCRIPTION:- Use over concrete, terrazzo and ceramic, quarry and porcelain tile
- Can be used to create a burnish-polished surface on indoor concrete
- Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
- Mold and mildew resistant Portland cement-based Use for interior floors only
-
ARD D14 PREMIXED TILE ADH 3.5 GL
$34.95DESCRIPTION:- Use for setting quarry, ceramic, mosaic and moisture-insensitive stone tile
- Sets porcelain tile over absorbent surfaces
- Use for interior walls, floors, and countertops
- Use to install tile in tub surround applications
- Easy to use and apply
- Good sag resistance
- Hangs up to 12” x 12” tile
-
ARD #SK-25 Mesh Roll 12mmx25mtr
$28.69Premium, non-woven, polyester mesh reinforcement fabric is used for reinforcement of ARDEX 8+9™ Rapid Waterproofing and Crack Isolation Compound in changes of plane, changes of material, corners and crack isolation -
ARDEX V1200 Self-Leveling Underlayment 50#
$34.25ARDEX V 1200™ is a blend of Portland cements, other hydraulic cements and polymers that is used to level and smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete prior to the installation of finished flooring – on, above or below grade. -
ARDEX FEATHER FINISH GRAY
$21.59Self-Drying Cement-Based Finish Underlayment
- Provides a smooth surface prior to the installation of floor covering over a variety of substrates
- Exceptional bond strength
- Install floor coverings in as little as 15 minutes
-
ARDEX P-51 Primer GL
$63.99Primer
- For absorbent concrete, wood, gypsum and non-water-soluble adhesive residue on concrete
- Seals the substrate
- For bonding ARDEX underlayments and toppings to appropriate substrates
-
ARDEX 8+9 Kit Gray
$97.18Rapid Waterproofing and Crack Isolation Compound
- Install tile in just 90 minutes and flood test in 4 hours
- Crack isolation up to 1/8" (3 mm)
- Zero water penetration via wind-driven rain
-
ARDEX Tilt Wall Patch 10#
$30.25Tilt Wall Patch and Finishing Compound for Vertical Concrete Walls
- Use for filling and smoothing interior and exterior vertical concrete or masonry surfaces
- Easy to mix and apply
- Hardens quickly without shrinking
