Cart (0)
Close
-
MAPEI #024325 TOPCEM PRONTO 55LB
$22.50DESCRIPTION:- Pre-blended ready-to-use mortar with normal setting and controlled shrinkage based on a special hydraulic binder and graded aggregates
- Extremely easy to use
- Workable for the same length of time as conventional cement based mortars but cures much faster
-
MAPEI PRIMER SN NA/B 00.83 GAL
$77.46DESCRIPTION:- Specifically formulated to carry out preliminary priming treatments on surfaces before applying epoxy and polyurethane resin systems from the Mapefloor range and self-levelling cementitious mortars from the Ultratop/Ultratop Living range to protect and coat civil and industrial floors, terrazzo floors and cementitious substrates in general
-
MAPEI PRIMER SN NA/A PART A 2.17 GL
$131.11DESCRIPTION:- Specifically formulated to carry out preliminary priming treatments on surfaces before applying epoxy and polyurethane resin systems from the Mapefloor range and self-levelling cementitious mortars from the Ultratop/Ultratop Living range to protect and coat civil and industrial floors, terrazzo floors and cementitious substrates in general
-
MAPEI #01968 AQUA DEFENSE 5GAL
$301.45DESCRIPTION:- Premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments
- Provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional
- Dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar
- Can be flood-tested after 12 hours of drying time
-
MAPEI #01953 AQUA DEFENSE GAL
$60.96DESCRIPTION:- Premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments
- Provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional
- Dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar
- Can be flood-tested after 12 hours of drying time
-
MAPEI #0080025 PLANI PATCH 25LB
$20.49DESCRIPTION:- Ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength
- Fast-setting
- Polymer-modified
- Easy to apply
-
MAPEI #0080010 PLANI PATCH 10LB
$11.35DESCRIPTION:- Ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength
- Fast-setting
- Polymer-modified
- Easy to apply
-
MAPEI #93653 ECO 360 GAL
$38.75DESCRIPTION:- High-performance, wet-lay and pressure sensitive adhesive designed specifically for installing homogeneous and heterogeneous solid vinyl flooring
- Strong, durable, moisture-resistant and alkali-resistant bond, it is ideal for commercial and institutional applications
- Excellent open time, develops strength quickly, performs well under rolling loads and resists indentation. Its low volatile organic content makes it ideal for use in occupied buildings such as hospitals and medical centers
-
MAPEI #1942315 ULTRABOND ECO 373 4GAL
$112.99DESCRIPTION:- Super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types
- Specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed
-
MAPEI #1942304 ULTRABOND ECO 373 GAL
$24.72DESCRIPTION:- Super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types
- Specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed
-
MAPEI #15411 ADESILEX P10 MOSAIC/GLASS TILE 10LB
$8.94DESCRIPTION:- Premium-grade, bright white, multipurpose thin-set mortar formulated with non-sag properties
- Designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone
-
MAPEI #1040005 ADESILEX P-22 5GAL
$53.10DESCRIPTION:- A premium-grade, ready-to-use, nonflammable, organic adhesive for setting most types of glazed and unglazed ceramic and porcelain floor/wall tiles as well as countertop/ceiling tiles for interior applications
- Smooth and easy to trowel
- Excellent grab: Up to 12" x 12" (30 x 30 cm) tile
- Low in odor and VOCs
-
MAPEI #1005001 ECO 575 28.7OZ
$5.02DESCRIPTION:- Use Ultrabond Eco 575 in interiors to bond skirtings and profiles in rigid PVC, rubber, wood and carpet on all absorbent wall substrates
- Not for external use
- Synthetic resin-based adhesive in water dispersion formulated in a ready-to-use beige paste
- Solvent-free and its VOC content is practically zero, so it is non-hazardous for the installer and the end-user
- High bond strength, does not stain or discolour light skirtings and is water resistant once hardened
-
MAPEI #010101 ADESILEX P-22 QT
$4.54DESCRIPTION:- A premium-grade, ready-to-use, nonflammable, organic adhesive for setting most types of glazed and unglazed ceramic and porcelain floor/wall tiles as well as countertop/ceiling tiles for interior applications
- Smooth and easy to trowel
- Excellent grab: Up to 12" x 12" (30 x 30 cm) tile
- Low in odor and VOCs
-
MAPEI #0060055 ULTRA FLEX GRIS #2 50LB
$19.75DESCRIPTION:- A professional-grade, single-component, high-performance, polymer-modified thin-set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural-stone tile
- This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile
- Can be used for interior and exterior installations of tile in most residential floor and wall applications
- In commercial applications, use on interior floor and wall installations and exterior floors
- Polymer-enriched for high performance and deformability
- Smooth and creamy consistency for easy application
-
MAPEI #0060049 ULTRA FLEX 1 WHITE 50LB
$14.99DESCRIPTION:- A standard-grade, single-component, polymer-modified thin-set mortar for most interior and exterior installations of tile
- This mortar has an above average content of unique dry polymer, resulting in good adhesion to the substrate and tile
- Can be used for both interior and exterior installations of tile in most residential floor and wall applications
- In commercial applications, use on interior floor and wall installations and exterior floors
- Polymer-enriched for performance
- Good bond strength with plywood
-
MAPEI #0060048 ULTRA FLEX 1 GRAY 50LB
$12.29DESCRIPTION:- A standard-grade, single-component, polymer-modified thin-set mortar for most interior and exterior installations of tile
- This mortar has an above average content of unique dry polymer, resulting in good adhesion to the substrate and tile
- Can be used for both interior and exterior installations of tile in most residential floor and wall applications
- In commercial applications, use on interior floor and wall installations and exterior floors
- Polymer-enriched for performance
- Good bond strength with plywood
-
MAPEI #11350000 Ultraflex LFT White 50lb.
$29.05DESCRIPTION:- Premium, Large-and-Heavy-Tile Mortar with Polymer
- Ultraflex LFTis a premium, non-sag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations
- This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile
- It is formulated with Easy Glide Technology™ for ease of application
-
MAPEI #36657 Primer T 2 gal.
$75.77All-Purpose Primer for Self-Leveling Underlayments Primer T is a low-VOC, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT), epoxy moisture barriers and adhesive residue, as well as profiled, absorbent surfaces. -
MAPEI #36153000 ECO Prim Grip gal.
$40.95Multipurpose Bond-Promoting PrimerECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in a dispersion. -
MAPEI #19250000 Ultraplan M20 Plus 50lb
$45.81Quick-Setting, High-Compressive-Strength, Self-Leveling Underlayment
Ultraplan M20 Plus is a calcium aluminate-based, quick-setting, self-leveling underlayment and topping. -
MAPEI #97164 Ultrabond ECO 711 FTR 4gal.
$56.10Ultrabond ECO 711 has been reformulated to provide even faster dry times, enhanced grab and greater slip resistance. Use to install vinyl composition tile (VCT) on approved substrates as well as over an existing single layer of VCT. Now a FastTrack ReadyTM product, Ultrabond ECO 711 has been formulated for higher moisture resistance, making it suitable for use over fresh concrete slabs with moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. (3,63 kg per 92,9 m2) per 24 hours.
-
MAPEI #95764 ECO 575 4gal.
$78.29DESCRIPTION:- Premium Wall-Base Adhesive
- Ultrabond ECO 575is a premium wall-base adhesive specifically designed to provide superior bond and impact resistance for rubber, vinyl and carpet wall base
- Ultrabond ECO 575also has been recently reformulated to offer even greater grab and wet strength, keeping corners wrapped tight
- Its acrylic-based, light-colored formulation won’t stain even the whitest wall base. In addition, Ultrabond ECO 575 can be used to install various types of carpet in vertical/wall applications
-
MAPEI #1005004 ECO 575 gal.
$23.00DESCRIPTION:- Premium Wall-Base Adhesive
- Ultrabond ECO 575is a premium wall-base adhesive specifically designed to provide superior bond and impact resistance for rubber, vinyl and carpet wall base
- Ultrabond ECO 575also has been recently reformulated to offer even greater grab and wet strength, keeping corners wrapped tight
- Its acrylic-based, light-colored formulation won’t stain even the whitest wall base. In addition, Ultrabond ECO 575 can be used to install various types of carpet in vertical/wall applications
