INFORMATION ARDEX K 10™
Choose Reactivatable™
ARDEX K 10™ is a reactivatable, high-flow, self-leveling underlayment that is used to smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete prior to the installation of finished flooring – on, above or below grade.
Key Features
- Reactivatable, high-flow material with long healing time
- Use to smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete
- A blend of Portland cement and other hydraulic cements
- Installs up to 1/2″ (12 mm) neat
- Can be tapered to meet existing elevations
- Walkable in 2-3 hours
- Install moisture-insensitive tile and stone after 6 hours, most other floor coverings after 24 hours (see Installation of Flooring section in Technical Data Sheet for details)
- Interior use only
Standards
SystemOne
Tested in Accordance with ASTM C1708
TECHNICAL DATA ARDEX K 10™
Installation
Mixing Ratio: 5.25 quarts (4.97 L) of water per 50 lb. (22.7 kg) bag
Coverage: 25 sq. ft. per bag at 1/4” (2.32 sq. m at 6 mm)
50 sq. ft. per bag at 1/8’’ (4.65 sq. m at 3 mm)
Coverage will vary depending on the texture of the surface being smoothed.
Performance
Flow Time: Up to 25 minutes
Compressive Strength (ASTM C109/mod – air cure only): 4,700 psi (329 kg/sq. cm.) at 28 days
Flexural Strength (ASTM C348): 1,000 psi (70 kg/sq. cm.) at 28 days
Walkable: 2 to 3 hours
Install Flooring: See installation of flooring section in the Technical Data
VOC: 0
Packaging: 50 lb. (22.7 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies. Also eligible for the ARDEX/HENRY SystemOne™ warranty when used in conjunction with select HENRY® flooring adhesives.
